Product Introduction
Lid Film Heat Seal Tester, model GBB-A3, can accurately measure the heat-sealing temperature, heat-sealing time, heat-sealing temperature Heat sealing performance parameters such as pressure. The heat-sealing performance of samples of different materials is different, and the best heat-sealing conditions can be accurately obtained through the determination of its heat-sealing performance parameters.
Testing Principle
Fit the appropriate clamps to the lower plate of the instrument and place the sample on the clamps. Set the heat-sealing temperature, heat-sealing time and heat-sealing pressure as required, start the instrument with one key, and the clamp on the instrument will lower to heat-seal the sample. In the manual state, step on the foot switch once, the heat-sealing knife is pressed, and the heat-sealing time is determined by the value set by the time control. In the automatic state, the upper and lower heat-sealing knives of the heat-sealing device are automatically heat-sealed repeatedly according to the set time.
Standards
ASTM F 2029, QB/T 2358-1998, YBB00122003-2015
Specifications
Item |
Technical parameters |
Temperature range |
Room temperature~250℃ |
Temperature control accuracy |
±1℃ |
Heat sealing time |
0.1s~99.99 h |
Heat sealing pressure |
(0~1) MPa |
Operating mode |
Automatic, manual |
Air Source |
Compressed air |
Instrument dimension |
730(L) mm×400(B) mm×535(H) mm |
Weight |
45 kg |
Power |
1200 W |
Power supply |
AC 220V,50Hz |
Features
Pull sample loading method
The lower pallet adopts a double-layer stacking design, which can be pulled to load the sample, away from the upper sealing bar, which is more convenient and safer.
High-precision quality temperature sensor
High-precision temperature sensor, with PID algorithm temperature control, the temperature control accuracy reaches ±1°C, it has ultra-high stability and ultra-low failure rate.
Individualized test selection
Optional choice of manual test and automatic test. The automatic mode is time-saving and convenient, repeatable and fully automatic to heat-seal the sample; the manual mode is equipped with a suitable foot switch, step on the foot switch, the heat-sealing knife is pressed, and the safety protection is easy to operate.
New air drive system
The drive system consists of a pressure gauge, a pressure regulating valve and a cylinder. After the compressed air is fed in, the pressure can be adjusted through the pressure valve, the air pressure can be precisely locked, and the heat-sealing fixture is pneumatically driven, which is convenient and efficient.
More extensive customization services
Fixtures can be customized according to incoming samples, and the fixtures can be switched freely according to the size of the cup.
The heat-sealing bar can upgraded into the anti-sticking function as needed, and to determine the best heat-sealing conditions more intuitively and conveniently.
The shape, size and smoothness of the sealing bar heating cover can be customized to meet different scientific research needs.
Hot Tags: lid film heat seal tester, China, suppliers, manufacturers, factory, custom, quotation, in stock, Plastic Bags Heat Seal Tester, Heat Seal Strength Tester, Heat Seal Testing Equipment for Packaging Film, Hot Tack Testing Machine for Laminated Film