info@gbtest.cn    +8615820231129
Cont

Have any Questions?

+8615820231129

Mask Particle Filtration Efficiency Tester for Mask

Mask Particle Filtration Efficiency Tester for Mask

EN143 EN149 Photometer PFE Tester Mask Particle Filtration Efficiency Tester For Mask is to test the filtering efficiency of particulate protective masks and medical masks and to determine the resistance of ordinary fabrics and medical protective masks to the constant flow of airflow.
Send Inquiry

Product Introduction


Specification

Item

Specification

Standards

GB2626, NIOSH 42 CFR Part 84, EN143, EN149, JIS/T 8151

Test range

0-99.999%, (Resolution 0.001%)

Test Challenge

NaCl and Parafin Oil (OR DOP)

Flowmeter range

(10-100)L/min,(Accuracy: 2%)

Sampling frequency

1-9999/min

Particle concentration

(0.001-200)mg/m3

Counting median diameter

Salt particles(0.075±0.02)μm、Oil particles(0.185±0.02)μm

Geometric standard deviation of particle size distribution

Salt particles≤1.86、Oil particles≤1.60

Dynamic detection range

0.001-100 mg/m3,accuracy1%

Dimension

1220mm×630mm×1225mm

Power supply

AC 220V,50Hz

Resistance test range

0~1000Pa, (Accuracy: 2%)


Features

• Photometer is capable of detecting 0.1-10 μm, 2 aerosol channels

• Using a cold aerosol generator to produce continuous and stable aerosol particles, convenient for filling the solution.

• Measurement of aerosol concentration using a high-precision PM2.5 sensor.

• Anti-leakage design of whole particles to protect the safety of laboratory personnel.

• Aerosol generator:Salty aerosol generator OR oily aerosol generator.

• Equipped with aerosol particle neutralization device.

• The pneumatic clamp is equipped with a protection device, which is safe and convenient to use.

• Configure temperature and humidity sensor, real-time display of ambient temperature and humidity(Temperature and humidity requirements:25℃±5℃,30%RH±10%RH).

• Equipped with glass rotor flowmeter, vacuum pump, laser dust particle counter.

• Control system: The computer controls the test process, automatically collects data, and configures a special computer and test software.

• The computer automatically tests the gas concentration and calculates the filtration efficiency. It can save, output, query and print the test data.



Hot Tags: mask particle filtration efficiency tester for mask, China, suppliers, manufacturers, factory, custom, quotation, in stock, Face Mask Differential Pressure Tester, GB MH180 Mask Tightness Tester, Disposable Medical Mask Respiratory Resistance Tester, Lab Synthetic Blood Penetration Non Woven Tester, Mask Particle Filtration Efficiency Tester for Mask, Exhalation Valve Air Tightness Tester

Send Inquiry

(0/10)

clearall